|
I Was Gonna Go About 3/4 Inch Up And About 1.5 To 2 Inches Closer To The Center To Get Around The Stringer That They Could'nt
IN FILLING THE OLD HOLES AM I RIGHT TO INSERT A DOWEL SOAKED IN RESIN THEN GLASS EITHER SIDE AND PAINT OR IS THIS NOT SAFE FOR THE TRANSOM? |
That's how I'd do it... based on the chronicles of Glassdave in the Fiberglass Forum.
Originally Posted by 007joe
(Post 2547563)
IN FILLING THE OLD HOLES AM I RIGHT TO INSERT A DOWEL SOAKED IN RESIN THEN GLASS EITHER SIDE AND PAINT OR IS THIS NOT SAFE FOR THE TRANSOM?
|
You might want to run it first. Could be far enough above the running surface to not have the problems. Seems like a bunch of work if its really not necessary. My 2 cents..
|
hurley (and everyone else) I just ran it today for the first time... i had her up in the 60's and she felt fine also just at regular cruise speed, 40-45 she handled great! i dont think i have to do anything, thanks for all the help guys!
|
| All times are GMT -5. The time now is 04:34 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.