What is the resevoir for? If plumbed with 2 cylinders you can get away without it, right?
I'll call you after work.

i just installed an imco full system. very nice product. was about $4000. but that with everything for a full system. i installed my rams inbetween the drives on my scarab/trs

I would love to see pictures of your install....Pictures of the inside especially. Did the 4k include a steering wheel?:)

total under 3k....

We carry Imco, Mayfair, WPM, and Zegler if you end up wanting new prices. There is alot to be said for buying a complete kit. The time and energy spent running around, making brackets etc...adds up real fast.

Let us know if we can help get you some pricing.

[email protected]

Kirk

I emailed you... no response yet.

no wheel so add $150. i am in the process of installing new engines so i can get you some good pic's inside. i redid the whole back of the boat this winter, new transm. gasket's, painted the transom, painted outdrive's & transom assembly's. pulled both engines added hyd. steering. did alot of neglected stuff. i will post pic's here & in the scarab forum.

Thank you ...I will keep an I out for the pictures. do you have borg-warners or merc trans?

trs & borg-warner trannys. i just got my engines back and dyno'd. 2 months behind but worth it. 468's , 470hp @5500 & 505ftlbs @ 4800rpm. i'm hoping to hold the drive's & tranny's together. they should i'm easy on it. had 420 hp before

also, i didn't like spending $$$ on the steering but i didnt want to take any chances and didnt realy know how to put one together. i will say imco was great to deal with direct.