Bravo 1 trim drive runs but I have no movement, stuck in the up position. . which way to go which way to go

It should be the down trim solenoid. I'm not sure of the colors of the wires they are dirrerent than the up side making it easy to find.
Maybe someone can help. It could also be the switch.

Blue Sky - Green Grass

somewhere to go! Thanks guys!!!

If the pump runs when you hit the down switch then it's not the solenoid. It could be your trim rams are frozen. It happened to my dads boat(Bravo1). Had to have the rams rebuilt. The kits are about $60 each. Just a thought.

Did you have the hose's off???

try someone heavy jumping on the drive while you hit drive down button - happens all the time

That sounds a bit too violent...

Have someone kick the drive downwards when you hit the buttom! If the trim motor runs ofcourse! If the drive has been sitting in the far most up position for some time it sometimes gets stuck and needs some help to break loose.

Sounds like the solenoid, thats where I would start. Look here.