blower pully help
04-05-2009 | 12:19 AM
#1
Thread Starter
Registered
Joined: Mar 2009
Posts: 7
Likes: 0
From: lakewood wa
blower pully help
ok i have a aerotech challenger tunnel hull i have BBC 519cid with eagle rods arp stud upgrade scat crank keath black 3cc flat top pistons brodix heads with 129cc cubustion chamber 360cc air runners i em doing full roller cam i think the 741 B&M 8-71 blower with supper cooler and 2 holly 750cfm carbs my compression ratio is 8.0.1 i em tring to come up with the with the right pulleys to run about 5 to 8 lbs of boost i dont have any pullys yet so i em just tring to get some ideas thannks agin
Last edited by klaus0404; 04-05-2009 at 12:30 AM.
