Bennet trim tab ?
I have bennet 12x12 trim tabs on a 29 footer. i was wondering if i could upgrade to the 12x16 bennet tabs by just knocking out the hinge pin and swaping out the trim tab plates, or do i need to change the whole trim tab and and hinge plate that is mounted to the boat?
|
I will post some pictures of what you need you will be impressed!:cool-smiley-027:
|
I believe you have insta trim 12x13 tabs not Benetts,
insta trim offers 12x16 plates that comes with the hinge plates for around $400.00 but the problem is you still have the slow moving cylinders. Look at your buddys boat across the street so you get a idea of what to do! |
most likely, yes..people swap 280 k-planes for 380's frequently, just the plate...measure the mounts, angles and the length of the rams for the longer setup...if it looks good, it probably is...be sure to check that your drives won't nip the inner edge of the tab... if you think they will, just cut the corner off...your tab will still work fine...
|
2 Attachment(s)
Originally Posted by pq man
(Post 2847804)
I will post some pictures of what you need you will be impressed!:cool-smiley-027:
|
Boatnt .... i thought that insta trim was made by bennet tabs ?
|
Originally Posted by pq man
(Post 2847804)
I will post some pictures of what you need you will be impressed!:cool-smiley-027:
|
Originally Posted by PQCRAZY
(Post 2847898)
Boatnt .... i thought that insta trim was made by bennet tabs ?
|
Now I can even spell BIG BLOCKS:cool-smiley-027:
|
Thanks for all the input :ernaehrung004:
|
All times are GMT -5. The time now is 11:29 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.