New swim platform
#1
Thread Starter
Registered
Joined: Apr 2009
Posts: 27
Likes: 0
From: Bethel Island, Ca
I just completed a install of a new swim platform on a 23' Ultra deck. It is made of Seaboard and covered with Hydro-turf rubber.



[IMG]http://www.performanceboats.com/html/youBoat/data/510/medium/Swim_platform_2005_23_Ultra_deck_010.jpg
[/IMG]



.



[IMG]http://www.performanceboats.com/html/youBoat/data/510/medium/Swim_platform_2005_23_Ultra_deck_010.jpg
[/IMG]



.
#3
Thread Starter
Registered
Joined: Apr 2009
Posts: 27
Likes: 0
From: Bethel Island, Ca
Thanks. This is my son's boat and they use the boat for wakeborading, so they needed more room to put on their boards and more room for the kids to play in the water. We will see how it works in a couple of weeks.
#5
Registered

Joined: Aug 2001
Posts: 919
Likes: 13
From: OPKS & LOTO
Looks great!
One suggestion, though. Run a narrow band of the starboard along the side adjacent to the boat. Wakeboards sliding all over the platform will beat the hell out of your gelcoat at the transom.
One suggestion, though. Run a narrow band of the starboard along the side adjacent to the boat. Wakeboards sliding all over the platform will beat the hell out of your gelcoat at the transom.
#8
Thread Starter
Registered
Joined: Apr 2009
Posts: 27
Likes: 0
From: Bethel Island, Ca
Boomer,
it is a polyelthene that has been UV protected, similar to cutting board material only in colors. it comes in different thickness and inside cores.
http://www.seaboard-marine.com/
it is a polyelthene that has been UV protected, similar to cutting board material only in colors. it comes in different thickness and inside cores.
http://www.seaboard-marine.com/
Last edited by wuped; 05-15-2009 at 06:43 PM. Reason: more info



