Nitrous Oxide on a boat
03-28-2014 | 06:37 PM
#41
Registered
Joined: Oct 2007
Posts: 8,439
Likes: 93
From: yorkville,il
No, it's MPH, because I can run a 36" Pitch Bravo 1 prop, the biggest thing that fit on that will fit on that shaft, and this is with a 1.5 gear with only 4000 RPM prop speed, 140 MPH is possible with a 1.36 gear (4500 RPM+ prop speed) but I don't think this 2-step hull will take it, it would need to be a 3-step hull with a cross-nylon composite similar to the Fountain racing hulls (25% lighter, 3X stronger), I have another 280 Silencer that has a cross-nylon composite hull licensed out by Fountain that goes significantly faster, this one also has an XV-Extended Drive with electric steering booster pumps to allow easier steering at higher speeds.
because you are full of 
so please
03-28-2014 | 06:44 PM
#43
Registered
Joined: Oct 2007
Posts: 8,439
Likes: 93
From: yorkville,il
03-28-2014 | 06:59 PM
#44
Registered
Joined: Nov 2004
Posts: 14,068
Likes: 3,667
From: On A Dirt Floor
Did you guys read the link I provided ? Here: http://www.offshoreonly.com/forums/p...ml#post4064606
He talks about a 218mph Powerquest 280 in Miami.
Well, that's it. Think I'm gonna stack four 400HP Big Shot Systems on Top of My 1000 HP Fogger system to see if I can get even close.
He talks about a 218mph Powerquest 280 in Miami.
Well, that's it. Think I'm gonna stack four 400HP Big Shot Systems on Top of My 1000 HP Fogger system to see if I can get even close.
Last edited by SB; 03-28-2014 at 08:49 PM. Reason: selling
03-28-2014 | 10:24 PM
#47
Registered
Joined: Apr 2005
Posts: 2,997
Likes: 127
From: Lees Summit ~ LOTO 10MM
This guys PQ aint sh:t. Just wait till y'all see my 266 crownline open bow with quad rotor psi nitrous injected rotary motor. It runs about a buck 65 with a bravo 3 to keep torque steer down and slip minimal. Halo drive shower keeps it cool though. 
Serious note: went over 170 in a friends car yesterday. Stuff is a blur at speed .... Lol.
Serious note: went over 170 in a friends car yesterday. Stuff is a blur at speed .... Lol.
03-28-2014 | 10:32 PM
#48
Banned
Joined: Jul 2013
Posts: 10
Likes: 0
Offshore race driving is easy at 200 MPH, anyone can do that, SUD driving at the speed is the real trick while being shot at and not getting hit, this makes about it about the man not the machine. One of you morons thinking for one second that you can outdrive or outbuild me, you'd have a better chance of striking out Miguel Cabrera on 3 straight pitches and taking the entire 248 Million dollars out of his pocket at the same time . . . good luck with that!!!
03-28-2014 | 10:39 PM
#49
Registered
Joined: Oct 2007
Posts: 8,439
Likes: 93
From: yorkville,il
my dream boat is a 2855 bayliner.im going to build a 1000 cu in hemi with 2 8.3L whipples and twin turbo,s running on nitro.im going with a ss alpha drive to handle the power.i estimate it will run 287 mph but may break 300 mph on a good day.maybe drscottallan will build the engine for me and dr azzclown can drive it.
