Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   Grab Rails? Bow Rails? Where To Get them? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/222128-grab-rails-bow-rails-where-get-them.html)

86BAJA 01-02-2010 01:33 AM

Grab Rails? Bow Rails? Where To Get them?
 
On a lot of the new boats they will have the "center" bar running the length of the bow it looks like one giant grab rail, i want to install 2 on the front of my boat and was wondering if this is a custom thing or can you buy them whole somewhere? Oh ya and i have no idea what they are called...if you could help..Thanks -Mike

Griff 01-02-2010 02:19 AM

I'm sure these guys could make you what you need. They made a custom bezel for me.
http://www.offshorenortheast.com/

I do have 2 long straight rails that are about 9 ft long that are powdercoated purple that I would sell, but shipping would be very expensive. Where are you located????

picklenjim 01-02-2010 03:05 AM

You can buy all the stainless parts to piece one together at West Marine.

jdub 01-02-2010 06:05 AM

The ones Griff has are what you want.....heres another option http://danamarineproducts.com/GroupC...e-38899a4f7e79

86BAJA 01-02-2010 09:40 AM

Griff, The ones you have is what I am looking for and i appreciate all the help I'm actually stationed at Ft. Riley Kansas and I see your in Omaha I could deff. make the trip to get the rails. I just have to measure the boat today to make sure they will fit. Thanks Again

86BAJA 01-02-2010 10:38 AM

Ergh, just measured the boat and 9ft is going to be to long need them right at 6'5 but thanks or the offer and continued help.

Griff 01-02-2010 11:57 AM

Mine were the original rails that were used as grab rails down the sides of the fairing on my 32 AT. I looked and they are actually closer to 10 feet long. They are just like what is on the sides of the older Sonics. They could be shortened by a good welder or they could easily be cut and capped on one end. The only thing is that they use 4 mounting bolts at each brace location that would be visible from the top. $100 for both of them.

86BAJA 01-02-2010 12:18 PM

Thanks griff for the offer but i think i am going to keep searching i want to try and get them flush with the top deck so no bolts are visisble.

jfm 01-02-2010 12:25 PM

Are you looking for the flat stock style like on the outlaws?

86BAJA 01-02-2010 12:43 PM

1 Attachment(s)
got this pic to kinda show what i'm looking for not a great one but you'll get an idea of what i want. Would like to install on both sides of my bow hatch and remove the old rails and kinda put a new school look on an old school boat


All times are GMT -5. The time now is 08:58 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.