Offshoreonly.com - Port side trim limit switch.

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Port side trim limit switch. (https://www.offshoreonly.com/forums/do-yourself-boating-budget/227788-port-side-trim-limit-switch.html)

scottw

04-05-2010 08:14 PM

Port side trim limit switch.

I'm rebuilding my transom and while doing so I am replacing both trim switches. Starboard switch for gauge still had the pluc connectors on it so that was plug and play. The trim limit switch on the port side had a broken wire on the outside so it was jumped out on the inside and wires were cut so I have no clue where it plugged in. I would like to make things work properly so my question is where do the trim limit wires tie into? What should I look for?

PAST DUE

04-05-2010 09:03 PM

there should be bullett connectors somewhere around the trim pump wiring that is where the trim limit switch should plug in.

scottw

04-06-2010 07:52 PM

Quote:

Originally Posted by PAST DUE (Post 3081809)

there should be bullett connectors somewhere around the trim pump wiring that is where the trim limit switch should plug in.

Thanks Past Due. It was right there infront of me. I thought it was it but wasn't sure. If it were a snake it woulda bit me.
:lolhit:

All times are GMT -5. The time now is 08:18 AM.