MEDIUMPIMPN

ANY ONE WANNA SHARE SOME INFO ON a good starting point for jetting, and fuel sys. setup

t500hps

a spare long block.....cause the Procharger is going to toast that non-mag 454.

sorry I can't help with any other info.

Sunshadow

I had a pair if prochargers on some 330's in my old baja. Go right to the procharger website get their phone number and call them for tech support. They want their stuff to work right even if you didn't get it from them. You won't be able to run a lot of boost with stock engines make sure your fuel pressure and flow are right (I had a problem with flow). If you do blow it up you have a great excuse to build a real engine. (-:

MEDIUMPIMPN

im building a new motor right now, id rather use my stock motor for a test pig, i called pro charger and they were going to send out the info but, they must of had some communication problems, i only got the normal info in the mail, ill call agin monday. this is my first boost set up with a carb, so im kinda lost, thanks alot for your info.

jason

mike tkach

iTrader: (3)

many years ago i put a 8 71 on a stock 330.set it up for 5 lbs boost.i knocked the skirts off all 8 pistons the first time i gave it full throttle.those cast pistons cant take more than 3 lbs boost.i think you will be changing the engine
very soon.

Sunshadow

agree only 3 psi on that stock setup

FIXX

iTrader: (2)

what carb are you using? are you using a box (carb enclosure)or a bonnet?