|
The TBIV is a good unit, it will work fine. Track down a V6 module for it so you can run a little more initial timing.
|
Originally Posted by 87MagnumII
(Post 3234997)
finally together, just gotta switch the rest over from the old one now
|
final assembly
1 Attachment(s)
here it is pretty much complete. only thing left is fuel lines and wire the choke but that will be done once its in the boat
|
Putting this thing in on Sunday. Got my fingers crossed! Hope it runs like a raped ape
|
Good luck let us know how she runs
|
Good luck let us know how she runs
|
It took a little longer to get it running than I planned but it finally is in and running!!!! Gotta run it a little and dial it in but for the most part sounds really good. Had a bell housing and coupler clearance issue and sprung a fuel leak on the cheap chitty dual feed fuel line I bought but other than I can't complain. Stay tuned for a YouTube video of the first start up.
|
Here's the vid. I'm the fat guy drinking beer standing at the helm lol
http://www.youtube.com/watch?v=xTQgX68FMgY |
Sounds great man. Nice rumble.
|
I hope for your sake, that is a roller cam in that motor. Non roller cam needs 1500 rpm break in for about 20 min. with a break in oil...... sounds good.
|
| All times are GMT -5. The time now is 04:44 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.