Offshoreonly.com - Installing Bellows On B3 Drive

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Installing Bellows On B3 Drive (https://www.offshoreonly.com/forums/do-yourself-boating-budget/243080-installing-bellows-b3-drive.html)

seafordguy

12-06-2010 10:23 AM

Is the Bravo 3 that much different from the B1? If not then you certianly don't need any special tools. I don't KNOW, but I doubt it is radically different.

Knot 4 Me

12-06-2010 10:36 AM

Quote:

Originally Posted by seafordguy (Post 3268101)

Is the Bravo 3 that much different from the B1? If not then you certianly don't need any special tools. I don't KNOW, but I doubt it is radically different.

Installing an exhaust bellows on a B3 is no different than on a B1.

4bus	12-06-2010 10:50 AM

If you guys noticed he was asking about bellows in general, not just exhaust. You DO need some tools to do all bellows, the exhaust only can be done from underneath.

seafordguy

12-06-2010 11:58 AM

Quote:

Originally Posted by 4bus (Post 3268122)

If you guys noticed he was asking about bellows in general, not just exhaust. You DO need some tools to do all bellows, the exhaust only can be done from underneath.

I have installed several B1 drive shaft and exhaust bellows with NO special tools and without taking the bellhousing, gimbal ring, or transom assembly off.

All times are GMT -5. The time now is 12:10 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page