![]() |
gafrig
what would cause my gaffrig tach to run a little higher then normal, or bounce around?
|
Check for play in the distributor shaft. This will many times show up as tach bouncing and then break up over 3000 or so. Also any oil under the cap = bad.
|
check ground also
|
thanks guys!
|
One of mine does the same thing at 4800+ rpms. I have checked everything and I can't figure out whats causing it.
|
Time for New Auto Meter Pro-Comp Marine gauges !
Jim |
Originally Posted by [email protected]
(Post 3392378)
what would cause my gaffrig tach to run a little higher then normal, or bounce around?
|
Originally Posted by Poker~N~Run
(Post 3395322)
Before pulling your dist keep it simple and look at the back of gauge. The grey signal wire is either loose or corroded. That wire is the rpm signal. The purple is the power.
|
| All times are GMT -5. The time now is 11:48 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.