question about CMI E Top tailpipes
#1
Registered
Thread Starter
Join Date: Jun 2011
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
question about CMI E Top tailpipes
I have a pair of CMI E Top headers and need a pair of wet exhaust tailpipes. I would like to weld some flanges onto the headers so that I dont have to use the old rope seals. Suggestions would be helpful
Thank You
Thank You
#2
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
fixx
http://www.frozenboost.com/product_i...99e0efd26f5e6a
#4
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
all marine tail pipes with headers shouls be water cooled(wet) you can blend at the tip..if you dont use wet pipes through the transom you will probably catch the boat on fire..
#5
Registered
Thread Starter
Join Date: Jun 2011
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
thanks again mrfixall
i have never been to that city in illinois, however it sounds like a great place to live...haha
still searching for used cmi wet tails for trs setup.
thanks
i have never been to that city in illinois, however it sounds like a great place to live...haha
still searching for used cmi wet tails for trs setup.
thanks