building 496 stroker need help picking parts
#1
Registered
Thread Starter
Join Date: Sep 2011
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
building 496 stroker need help picking parts
just pulled my 330hp 454.
im going to put in a stroker kit and trying to figure out which heads, intake, carb to go with and what compression. advice please.
im going to put in a stroker kit and trying to figure out which heads, intake, carb to go with and what compression. advice please.
#2
Registered
Join Date: Oct 2010
Location: traverse city,mi
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
I run 454 420hp's worked to 496's, 60 over Eagle crank, J.E. Pistions, H-Beam rods, ported and polished MIRLIN (WORLD) heads, Roller Rockers, mercury racing 650's carb's with DART intakes and LIGHTNING headers , runs 87 octane 525hp.
Last edited by pgolder; 09-19-2011 at 09:38 AM.
#3
Registered
Good large oval port heads with Inconel exhaust valves and flat top pistons which will give you 9 to 9.5:1 compression.
Edelbrock RPM airgap dual plane intake
800 Holley marine carb
Crane 731 roller cam
Roller rockers
Edelbrock RPM airgap dual plane intake
800 Holley marine carb
Crane 731 roller cam
Roller rockers
#6
Registered
Thread Starter
Join Date: Sep 2011
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
And thank you for the replies.