building new engine have a few questions
first off gen4 block what oil pan and pickup 4.25 crank best bang for your buck that will clear the engine mount without issues and who has a nice set of fab valve covers that will clear headers and valve train any help would save me alot of guessing
|
|
thanks for the info ill keep checking that pan you are using is only a 10 quart pan looks like it fit nice what cubic inch is yours
|
I used the one below in my 24' Sunsation, it should fit your boat it comes with everything you need and it even cleared my bilge pump in the stock location. Only thing I didn't use was the gasket I bought a better one.
http://www.summitracing.com/parts/HAM-1498/ |
Originally Posted by FOUNTAINBOY27
(Post 3516672)
thanks for the info ill keep checking that pan you are using is only a 10 quart pan looks like it fit nice what cubic inch is yours
|
I can tell you what pan NOT to buy Milodon # 31560 Ordered a pair of them and they were JUNK !!!!!!!! Looked like a 5 year old kid welded them together and were not even close to fitting the block . Learn from my mistake . Jeff
|
All times are GMT -5. The time now is 10:36 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.