building new engine have a few questions
#1
Registered
Thread Starter
Join Date: Mar 2005
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
building new engine have a few questions
first off gen4 block what oil pan and pickup 4.25 crank best bang for your buck that will clear the engine mount without issues and who has a nice set of fab valve covers that will clear headers and valve train any help would save me alot of guessing
#2
Registered
Join Date: May 2007
Location: Georgetown, TX
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
#4
Gold Member
Gold Member
iTrader: (1)
Join Date: Sep 2010
Location: LSC, MI
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
I used the one below in my 24' Sunsation, it should fit your boat it comes with everything you need and it even cleared my bilge pump in the stock location. Only thing I didn't use was the gasket I bought a better one.
http://www.summitracing.com/parts/HAM-1498/
http://www.summitracing.com/parts/HAM-1498/
#5
Registered
Join Date: May 2007
Location: Georgetown, TX
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
#6
Banned
Join Date: Mar 2008
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
I can tell you what pan NOT to buy Milodon # 31560 Ordered a pair of them and they were JUNK !!!!!!!! Looked like a 5 year old kid welded them together and were not even close to fitting the block . Learn from my mistake . Jeff