msd
 

I think my msd blew yesterday, we were putting a new starter back in, and I left the batts on:eek:. was told there was a spark. now no spark when we tried to start it. does msd re build these, its brand new like everything else on this boat.

Yes, I think I paid 75. almost 2 yrs ago. I keep a spare now.

...you should have a spare if you're running MSD. (May Soon Die) :drink:

Been there too many times with that junk, not a fan.

They only rebuild the automotive ones, not the marine ones. Due to the fact the marine ones are filled with epoxy.

fixx
 

So are the car ones :drink:

The 6AL "N" and 6an are, but not the 6A or 6AL. The "N" is for nascar guys I think. Talked to MSD last week about this, as one of my marine ones took a crap. Says Im SOL. They will rebuild the 6A or 6AL ones he said. :drink:

"N" series potted with epoxy
http://www.msdignition.com/Products/...n_Control.aspx

Basic street 6AL=no epoxy
http://www.msdignition.com/Products/...n-Control.aspx

i dont know what u guys do, i have never had a problem with my MSD marine box !:party-smiley-004:

if u have min 13.8 volts and no wire issues.. THEY LAST FOREVER !

School is in session! :drink:

what everybody is telling you is right-on.always carry a spare box and cap/rotor.after 7yr,s w/about 300-400 hrs on it ,i had a failure,box/cap/rotor,i do not know what failed,everything toast,and yea,i had a box[brand new],no cap/rotor.hows that for luck????oh,did i tell you i was 78 miles from home?carry spares,its good stuff,and it works,but chang in china is only going to make it but so good.

make sure you check your coil , cheaper than new box