Offshoreonly.com
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   540 carb??? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/266920-540-carb.html)

swan2 12-09-2011 01:18 PM
Yes its is n/a I have the srp domed pistons. Can I do A compression check and find out the ratio? I think im going to go with the 1050 dominator.

dsmarine1 12-09-2011 01:44 PM
aed hp 1000cfm 4150 base

mike tkach 12-09-2011 02:02 PM
when i said a 850 will work,i ment that is the smallest that will work,a 1050 will work also ,espically if your compression is 10 to 1 or more.

goebel1 12-09-2011 02:28 PM
Originally Posted by mike tkach (Post 3567796)
when i said a 850 will work,i ment that is the smallest that will work,a 1050 will work also ,espically if your compression is 10 to 1 or more.
x2

goebel1 12-09-2011 02:35 PM
Originally Posted by swan2 (Post 3567764)
Yes its is n/a I have the srp domed pistons. Can I do A compression check and find out the ratio? I think im going to go with the 1050 dominator.
If you have a part number look up the piston and see what CC the dome is or post it here and ill look it up for you

bajabob 12-10-2011 09:34 AM
850 will not work . i have a 540 dart 345dart heads dart intake try 3 cams and i try 850 on the dyno no good . i have a 1000holley and got 718 hp at 34degree timing 5800rpmthats mytesting . good luck :drink:

mountainmadness 12-11-2011 09:59 AM
Call Patrick at prosystem's. He will build u a setup that will rock.. he built me a HP 1000, 4150 base that flowed 960 cfm. I run it on my 428 SBC and it loves it.

KAAMA 12-31-2011 07:20 AM
Originally Posted by mountainmadness (Post 3568888)
Call Patrick at prosystem's. He will build u a setup that will rock.. he built me a HP 1000, 4150 base that flowed 960 cfm. I run it on my 428 SBC and it loves it.
I wonder what a Holley HP 1000cfm (4150 base) carb flows out of the box from the Holley factory?....anybody know???

mountainmadness 12-31-2011 07:59 AM
Hi mark.... think the hp 950 flows around 830 cfm and the hp 1000 flows around 870 cfm

KAAMA 01-01-2012 02:43 AM
Originally Posted by mountainmadness (Post 3582678)
Hi mark.... think the hp 950 flows around 830 cfm and the hp 1000 flows around 870 cfm
Howdy, hey much thanx! Would you happen to know what a Holley 1050 (4500 base) Dominator actually flows out of the box too??? :)


All times are GMT -5. The time now is 08:04 PM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.