502 Mag MPI Throttle body question?
01-25-2012 | 07:19 AM
#13
Registered
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
RRZ28 ......what is the standard bore on the TB and how much can you open it up? I understand that getting the profile of the of the butterfly down helps too .....
Last edited by offthefront; 01-25-2012 at 07:28 AM.
01-25-2012 | 01:15 PM
#15
Registered
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
If anyone has any extra of the big Oring that fits into the intake Manifold and the injector slides into ....I need 4 or 5 ..... and alsoi I need one of the intake Bolts ... flange bolt .... 3/8 x 5.5 "
let me know how much you need for them ... I can paypal ....m
O ring is about .85 OD .52 ID .31 tall .......
let me know how much you need for them ... I can paypal ....m
O ring is about .85 OD .52 ID .31 tall .......
01-25-2012 | 03:49 PM
#16
Registered
Joined: Feb 2010
Posts: 164
Likes: 0
From: Minneapolis,MN
Mike-
The stock bore size is 60mm and were are out to 69mm. We also contour the throttle shaft and bolts.
The stock bore size is 60mm and were are out to 69mm. We also contour the throttle shaft and bolts.
04-28-2012 | 09:06 AM
#20
Registered
Joined: Mar 2012
Posts: 184
Likes: 0
From: Wisconsin
