Thank you for the apology! You can always tell a gentleman, he rarely makes in poor taste comments and he apologizes when he does! I know you and I are here just trying to help others, that's a good thing!

Best Regards,
Ray @ Raylar

i must agree with ray on this one,you get what you pay for,if you cant afford the good quality parts,wait until you can,the cheep chinese patrs WILL FAIL.it not a matter of if,it a matter of when.i know its tempting to buy the cheaper parts,but in the long run,it will only cost you more money,after the cheap crap fails,and does more destruction to the rest of the engine,if you are a gambler,have at it,but i guarentee you,it wont be long before you looze.sorry,but it is what it is!

I have some tae off 454 mag heads and new manley ss valves. Just replaced with roller rocker econel valve heads if interested. Good shape just did a little winter performance projest

casr # 088

from what limited research I have done on the quality of Pro Comp and similar chinesium heads that are flooding the market there are more issues than aluminum quality. many have found valve guides in the wrong location and angle and valve seats off center of the valves. there are guys out there in the car world that have spent thousands to fix everything on a $800 set of heads only to have an inferior head at a higher cost than if they had just bought a set of Brodix or Edelbrocks. just my $.02 but a quality used part is far better than a crappy new one.

Bolt call me about heads 812-989-5778

Will do today

can you call me about those heads..lost your number

Hmmm....

Listen to him, dont buy heads and engines off ebay, you will be rebuilding it before it evens gets in the boat. "FRESNO"