Window Glass rubber strips.
#1
Registered
Thread Starter
Window Glass rubber strips.
I am replacing the glass and frames in my 255 Formula Liberator A~Z.
Does any one know of a source for the retainer bead or rubber strips that hold the glass in the frame? I am surprised that I am having trouble finding this material.
Local SE Florida pick up preferred.
Does any one know of a source for the retainer bead or rubber strips that hold the glass in the frame? I am surprised that I am having trouble finding this material.
Local SE Florida pick up preferred.
#2
Registered
Join Date: Dec 2010
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
is this a standard Taylor Made windshield? if so here is the parts website: http://www.taylormarine.com/hardware/index.html
hope this helps
doug hunt
hope this helps
doug hunt
#3
Registered
One of these places always has what I'm looking for.
http://www.sealsdirect.co.uk/shoppin...DepartmentId=4
http://www.stroboflash.com/SeaRayPro...or%20390EC.pdf
http://www.taylormarine.com/hardware...zingparts.html
http://wefcorubber.com/extrusions_marine.asp
http://www.sealsdirect.co.uk/shoppin...DepartmentId=4
http://www.stroboflash.com/SeaRayPro...or%20390EC.pdf
http://www.taylormarine.com/hardware...zingparts.html
http://wefcorubber.com/extrusions_marine.asp
#4
Registered
Thread Starter
Thanks guys...this gives me a great head start. I'm going to call Scott Smith...Formula Customer Service to see if he has the specs for this. I think my assemblies were either Water Bonnet or Taylor made and cover several Formula models from the late '70's through '86 which was the end of the "Flat Glass" era.
#6
Registered
Thread Starter
Read below....
V
V
V
V
Last edited by sprink58; 03-21-2012 at 08:52 PM.
#7
Registered
Thread Starter
Glory Halleluyah
Thanks guys...this gives me a great head start. I'm going to call Scott Smith...Formula Customer Service to see if he has the specs for this. I think my assemblies were either Water Bonnet or Taylor made and cover several Formula models from the late '70's through '86 which was the end of the "Flat Glass" era.
Oh hell yeah!! I said. I will call him back in the AM and get the specifics on the gaskets and other hardware I need.
So all you "Flat Glass" Formula guys out there take notice...Captain Sprink has hit the mother load on the glass and frames we need!!!
Stay tuned...
#9
Registered
Join Date: Apr 2009
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
I used these people when I replaced my dry rotted rubber holding my glass in on my 81 Scarab S. Great people to work with sent me several inches of differant sizes to verify which one I needed.
http://www.americanmarine.com/parts-gaskets.html
http://www.americanmarine.com/parts-gaskets.html
#10
Registered
Thread Starter
I just got the CAD drawings today of the vent widows Style 2121. These fit most 77~86 Formula "Flat Glass" applications for sport cruiser...LS models.
PM me with your e-mail if you would like a copy...everything you need for a 100% perfect reproduction. FYI...you need Auto Cad or a dwg format reader to view.
PM me with your e-mail if you would like a copy...everything you need for a 100% perfect reproduction. FYI...you need Auto Cad or a dwg format reader to view.