|
paul,you said it was doing it before the valve springs were replaced,but it sounds like maybe one of the rocker arms is rubbing against a valve cover.i would remove the valve covers and look for any marks from rubbing.usually two rocker arms on each side are clearanced ,if they did not get put back in the right place,they will rub,as rookie mentioned,if you loosen the valve cover bolts,and the sound changes,you have found the problem.
|
what does it do at higher RPMs? get louder? faster? stop?
|
and fuel pump i have heard fuel pumps make that noise
|
Originally Posted by Rookie
(Post 3705158)
Do not know if your valve covers need the clearanced rocker. But it sounds like mine did when I put my new rockers on and just didn't clear enough material on the corner. I loosened the valve cover bolts and I could see it move as the rocker went up and down.
|
Canton oil stat; disapointed
ooops wrong thread
|
| All times are GMT -5. The time now is 04:13 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.