Help with ignition alarm
08-02-2012, 11:34 PM
#1
Registered
Thread Starter
Join Date: May 2004
Location: Clear Lake Shores, TX
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Help with ignition alarm
Recently i redid my guages. Went from original gaffrig with ring terminals to Lavorsi with deutche connectors. All gauges are working properly but one thing is different from before i cant figure out. When i start one motor the alarm stays on until I start the other motor. It never use to do this.
