Best place to get tinned wire
#1
Thread Starter
VP of the tickfaw200

Joined: Jul 2007
Posts: 2,124
Likes: 184
From: baton rouge, louisiana
What's the beat place to get tinned wire at? Would like to get what I have now all 3 colors black red green. in one but will make my Owen if needed.
#3
Registered
Joined: Dec 2009
Posts: 2,480
Likes: 2
From: Wyandotte, MI
Damn.... My allergies are driving me nuz and thus making my eyes water and blurry. WHen I read the title to this thread it saw "best place to get tanned wife". THink it is time to close my eyes and go back to bed. SOrry for the hi-jack. just thought it was funny, especially when I read the thread it didn't make since until I rubbed my eyes clear......
#4
Registered

Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
#5
Registered

Joined: Sep 2002
Posts: 2,091
Likes: 163
From: King george, Virginia/Potomac River
#7
Registered

Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
Coolest part about that place, is they will assemble your marine cables, for $1.00!
Example. Last winter, I upgraded to 100 AMP alternators. My stock merc wire was 10 Gauge. I decided to go with 6gauge, from the alternator to the starter. So I ordered two lengths of 6 gauge wire, the proper lugs, heat shrink tubing, and custom assembly. A few days later, I had two proper length cables assembled and shrink wrapped. Total cost was something like 20 bucks shipped!
Example. Last winter, I upgraded to 100 AMP alternators. My stock merc wire was 10 Gauge. I decided to go with 6gauge, from the alternator to the starter. So I ordered two lengths of 6 gauge wire, the proper lugs, heat shrink tubing, and custom assembly. A few days later, I had two proper length cables assembled and shrink wrapped. Total cost was something like 20 bucks shipped!
#8
Registered
Joined: May 2010
Posts: 119
Likes: 1
I was happy with the wire I bought from them



