Offshoreonly.com - EMI Exhaust comparison

Page 2 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - EMI Exhaust comparison (https://www.offshoreonly.com/forums/do-yourself-boating-budget/304886-emi-exhaust-comparison.html)

MCKILLOP

11-04-2013 10:15 AM

What would EMI build them like that? I had Gill manifolds on ther previously and didn't have that problem. You would think EMI would address that issue

Port Monster

11-04-2013 01:12 PM

Just put a set on my 454 mark IV's and had the same damn problem!

motor

11-05-2013 05:34 AM

Quote:

Originally Posted by MCKILLOP (Post 4021542)

What would EMI build them like that? I had Gill manifolds on ther previously and didn't have that problem. You would think EMI would address that issue

The only way they could "address it" is to make the manifold thinner in that area. I'd rather deal with the hose .. .

minxguy

11-05-2013 07:19 AM

MCKILLOP, post an e-mail address and I will send a photo of my 454 w/EMI installed.

They were on the engine when I purchased the boat.

Ken

MCKILLOP

11-05-2013 11:32 AM

@Motor: that makes sense.

Minxguy, my email address is [email protected]. That you very much for your help. I really appreciate it!

minxguy

11-06-2013 06:15 AM

MCKILLOP, photo sent.

Ken

blaquebaja

11-06-2013 03:03 PM

Can you send me pic also? [email protected]

minxguy

11-07-2013 05:58 AM

blaquebaja, photo sent.

Ken

blaquebaja

11-08-2013 05:54 PM

Quote:

Originally Posted by minxguy (Post 4023053)

blaquebaja, photo sent.

Ken

Thank you

blaquebaja

11-08-2013 06:12 PM

Quote:

Originally Posted by MCKILLOP (Post 4021542)

What would EMI build them like that? I had Gill manifolds on ther previously and didn't have that problem. You would think EMI would address that issue

Today I called Keith Eickert in Palm Coast FL. They want $42.99 for their Banjo fitting P/N 136-1013. 5/8-18 Banjo with # 6 AN fitting. They said that they make them in house. Phone 386-446-0660. No way in hell will I pay that much for one fitting. Looked on net found this company in Lake Havasu PURE CHOICE MOTOR SPORT they have the same thing made in brass. for $24.95 P/N 11810 Their phone is 888-505-8355. Check them out.

All times are GMT -5. The time now is 07:55 PM.

Page 2 of 3

Show 40 post(s) from this thread on one page