this project started because my wife bought me a soon to be full set of livorsi gauges for Christmas. the gps speedo and drive water psi will be coming soon. so this is my template the center will be cut out later its laid out for a garmin 740s chart plotter.[IMG][/IMG] this is the new dash made out of marine plywood. [IMG][/IMG] here i used a fleece sweat shirt that my daughter grew out of to form for the rpm and speedo.[IMG][/IMG] all glassed in [IMG][/IMG] with countless hrs of sanding this is how it looks now [IMG][/IMG]

[IMG][/IMG]

i will be using a setup similar to this with these switches and bezels http://www.lipship.com/parts/view/39
livorsi makes a color matching cover for the 740 chart plotter that will be in the box with the two missing gauges.http://www.livorsi.com/index.htm

Wow great job it looks very nice.

Looks good!

nice work! looks like the fleece wetted out well. West system?

Thanks guys
I used total boat epoxy from Jamestown distributers but mixed it with west systems filler it worked out well. Here is a pic with the speedo installed with one coat of paint.[IMG][/IMG]

[IMG][/IMG]

Here's an update with my dash project.
I have the garmin 740 installed.[IMG][/IMG]

This is a test fit of the templates that will be made of carbon fiber.[IMG][/IMG]