rebuilding 454
03-05-2014 | 07:34 PM
#64
Registered
Joined: Jul 2007
Posts: 3,648
Likes: 32
From: Oneida Lake NY
Didn't we deal with this azz wipe before under a screen name of "racer" something? The diarreah of the mouth smells familiar.
If you are going to stereotype us for having more money than brains, we are going to stereotype you right back. We know type. The only reason you have more brains than money, is because you only have 37 dollars. We learned a long time ago that the cob job approach may work in a little boat long enough for you to burn the gas money you earned collecting bottles and cans, but for us serious boaters that want reliability it so going to take the right stuff.
I went from trying to keep you on the conservative side and safe you some grief, to now wanting to watch you fail in person. Please keep us posted
Btw, the sea ray obviously has a malfunctioning tach, and no one saw u cause no one here cares about a pile of crap sea ray doing 28 mph. Head over to thehulltruth.com for help with the tach.
If you are going to stereotype us for having more money than brains, we are going to stereotype you right back. We know type. The only reason you have more brains than money, is because you only have 37 dollars. We learned a long time ago that the cob job approach may work in a little boat long enough for you to burn the gas money you earned collecting bottles and cans, but for us serious boaters that want reliability it so going to take the right stuff.
I went from trying to keep you on the conservative side and safe you some grief, to now wanting to watch you fail in person. Please keep us posted
Btw, the sea ray obviously has a malfunctioning tach, and no one saw u cause no one here cares about a pile of crap sea ray doing 28 mph. Head over to thehulltruth.com for help with the tach.
03-05-2014 | 08:51 PM
#67
Registered
Joined: Oct 2007
Posts: 8,439
Likes: 93
From: yorkville,il
hay bugerweiser,did you not say this site is not for you?please tell us what camshaft you have in your 7,500 rpm 350.il just go ahead and say what everybody is thinking,you are a big bull sheeter but you are amusing!
03-05-2014 | 11:49 PM
#69
Registered
Joined: Jun 2009
Posts: 9,967
Likes: 6,455
From: Chicago
... and a dictionary .
wait you probably didn`t understand.. I`ll try again:
Y knot cell tose end wit D $$ buye 1 d cent boat...end a dicksionary
Last edited by ICDEDPPL; 03-05-2014 at 11:57 PM.
03-06-2014 | 02:12 PM
#70
Registered
Joined: Nov 2004
Posts: 14,093
Likes: 3,683
From: On A Dirt Floor
Buddy1234 -
Didn't you beat me racing once - Bench Racing .
On a serious note, with your big block what you need to wake up that boat is a set of bleed up lifters, adjustable roller valves, peanut butter port heads (I run'm - see info under my name to left),Harley two pump carb, corvette heads, and an external cam pulley. To start with.
As you mentioned, going to a bigger outdrive always provides more speed - my experience is 10mph or faster.
Didn't you beat me racing once - Bench Racing .
On a serious note, with your big block what you need to wake up that boat is a set of bleed up lifters, adjustable roller valves, peanut butter port heads (I run'm - see info under my name to left),Harley two pump carb, corvette heads, and an external cam pulley. To start with.
As you mentioned, going to a bigger outdrive always provides more speed - my experience is 10mph or faster.
