Converting from single control to dual stick controls?
Hi all,
I'm thinking of converting my sigle stick control to a dual stick control on our Baja Islander. One, has anyone done this? Two, this is a side mount that will be coming off so a side mount/pod system will be needed. Three, Any suggestions? I found this unit for sale but was wondering if there was a little different/cheaper set up? http://www.monstermarinestore.com/pr...d=1453&incat=7 The unit above looks very nice but its a bit more than I really want to spend at this point. Thanks in advance Jeff B In Maine |
I think in order to convert side mount to separate shift/throttle you would have to build a box to mount it in. Your link didn't open for me. Other than that its am easy swap. Controls are expensive.
|
link doesnt work. i am assuming you want something like these.
http://www.cpperformance.com/p-65184...t-shifter.aspx http://www.cpperformance.com/c-842-d...-controls.aspx the problem with building a box to mount the normal ones is the angle you would have to have your cables coming out at to no be a complete eyesore. at least not any uglier than the random box just hanging on the side of the boat. |
there is also a Teleflex one 620 on ebay but has little brown and black knobs like a sportfisf control.
|
Would you happen to have a link to the Teleflex unit on Ebay?
Beaver 3 found what I was looking into. Those things aren't cheap. :eekdrop: |
just go to ebay and put Teleflex dual lever throttle in search box
|
I could only see 3 units up online and none of them look anywhere near what I would want
Thanks anyway |
Livorsi makes some really nice looking single side mount levers that would be a nice upgrade without a lot of extra work and reconfiguration.
|
Originally Posted by bustedbrick
(Post 4149383)
Livorsi makes some really nice looking single side mount levers that would be a nice upgrade without a lot of extra work and reconfiguration.
I MAY have to spend the LONG dollar in the future to get what I am looking for. (as much as I hate too) Thanks for chiming in though, I greatly appreciate it. You never know, someone might have already done what I'm looking to do with something a little different for le$$ than the Dana set up. Jeff B In Maine |
Originally Posted by bustedbrick
(Post 4149383)
Livorsi makes some really nice looking single side mount levers that would be a nice upgrade without a lot of extra work and reconfiguration.
I MAY have to spend the LONG dollar in the future to get what I am looking for. (as much as I hate too) Thanks for chiming in though, I greatly appreciate it. You never know, someone might have already done what I'm looking to do with something a little different for le$$ than the Dana set up. Jeff B In Maine |
All times are GMT -5. The time now is 02:20 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.