Best place to get hydraulic lines
02-01-2015, 01:18 PM
#1
Registered
Thread Starter
Best place to get hydraulic lines
I moved my trim and tab pumps and need shorter lines. They were long to start with and now I don't feel like wrapping them back and forth.
Where is a good place to buy or should I have a shop shorten them?
Where is a good place to buy or should I have a shop shorten them?
02-01-2015, 01:57 PM
#3
Registered
Join Date: Jul 2014
Location: Northern Indiana
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
Not sure on how much pressure is in the system, but you can get braided stainless line and AN fittings that are good to 1000 psi from summit and make your own. Definitely check with someone who knows how much pressure the system makes first, though.
02-01-2015, 02:17 PM
#5
Charter Member
Phil, I had a couple of mine remade by a member on here, forget screen name, but you gotta be real careful on clocking the fittings when the lines are cut to exact length.
Found it
Jb-fse
http://www.offshoreonly.com/forums/g...-get-them.html
Found it
Jb-fse
http://www.offshoreonly.com/forums/g...-get-them.html
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 02-01-2015 at 02:21 PM.
02-01-2015, 02:27 PM
#7
Registered
iTrader: (1)
Join Date: Aug 2006
Location: Ontario, OH
Posts: 2,465
Likes: 0
Received 0 Likes
on
0 Posts
Parker - PTH-3 is the hose.
Or you can do hard lines. You can either use the coated brake lines or use flareable 3/16 stainless.
Or you can use swageloks, with flex line and hardline.
Or you can do hard lines. You can either use the coated brake lines or use flareable 3/16 stainless.
Or you can use swageloks, with flex line and hardline.
Gold Member
