I was wanting to get oil hoses ordered up and am not at the shop to see what size they are. I've got the lengths I need. Also if ordering from Napa what type of line/hose do I ask for? Power steering or the reinforced rubber brake line?
Tks
John

If you can locate pumps right above planes on transom you can run hard brake lines.

Are they a double flare ends I wonder? My drive pumps are in that general area so I was wanting to locate a little further forward on some mini bulkheads I glassed in.
Tks
John

They look like single flares in pics. Take an old hose to auto parts store to compare with the brake lines...

Thanks. Ya that was a problem. There is none. I bought the tabs and pumps in near new condition however ya I can just take a tab and pump in. I see you can purchase lines here and there however I need a little longer than the typical mounting app.

Thanks. Ya that was a problem. Im referring to the hoses in the bilge.

How long of hose do you need I have some I'm not going to use I am having some made up here in town at Bond Fluidaire

No more than 2 1/2 ft max ea. tks Dennis.

I have an apology to make. I had my partner get my pumps down from parts rack today and pumps have the hoses on them. Plenty long also. They were coiled up and zip tied on the back side of them.

Installing tomorrow. When installing the tabs are stringer washers important on the inside of transom?