Offshoreonly.com

Go Back  Offshoreonly.com > Technical > Do It Yourself, Boating on a Budget
KE / Hardin two stage sea pump >

KE / Hardin two stage sea pump

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

KE / Hardin two stage sea pump

Thread Tools
 
Old 08-18-2015, 05:53 AM
  #1  
Registered
Thread Starter
 
Join Date: Sep 2011
Location: Moscow OH.
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default KE / Hardin two stage sea pump
Anyone have the bearing and seal numbers. Mine started leaking after just 6hours using there rebuild kit with a new shaft.
the mayor is offline  
Reply
Old 08-18-2015, 06:15 PM
  #2  
Registered
Thread Starter
 
Join Date: Sep 2011
Location: Moscow OH.
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default
Definitely the seal right behind the bearings was leaking out the weep holes. I plugged the outlet put 10 psi air in the inlet and blew water out the weep holes. Anyone know the numbers of that seal going to try to get one from a bearing supply house.
the mayor is offline  
Reply
Old 08-21-2015, 07:46 AM
  #3  
Registered
Thread Starter
 
Join Date: Sep 2011
Location: Moscow OH.
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default
Seals SKF 7443
Did not change the bearings. They are sealed and were new with only 6 hours.
the mayor is offline  
Reply
Back to Subforum
Do It Yourself, Boating on a Budget
View Next Unread
ignition curves for turbo engines

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.