Mold and milew removal that worked!!
#1
Mold and milew removal that worked!!
I tried CLR mold and mildew remover- didnt work at all. waste of money. Tried purple power and dep hd claener ...nope, not even a little. tried scrubbing too.(they do work with dirt though) then I used bleach full strength carefully , keeping away from threads rubbing gently with a small brush and cloth and rinsed and wiped /washed area right away. worked Mint. after cleaning I coated the seats with uv protectant similar to 303 from Napa. seats look great. This was on a Formula so the vinyle is very thick and high quality.
#2
Ive been told that bleach only kills mold/mildew at the surface and doesn't penetrate to kill the stuff in the deep holes that it may be sitting in so it will probably return......one old timer told me to use some TSP (Trisodium phosphate) in a mixture with bleach and that will kill it all the way through....i haven't tried it on any boats yet, but did clean my basement tiles when we had a flooding some 3 years back and never had any issues...
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#3
Ive been told that bleach only kills mold/mildew at the surface and doesn't penetrate to kill the stuff in the deep holes that it may be sitting in so it will probably return......one old timer told me to use some TSP (Trisodium phosphate) in a mixture with bleach and that will kill it all the way through....i haven't tried it on any boats yet, but did clean my basement tiles when we had a flooding some 3 years back and never had any issues...
#4
Registered
iTrader: (7)
That 303 works well on sun faded gelcoat also. It's temporary however works really well. Spray/mist it on and let sit for a few minutes and lightly wipe off. Used it often on an old liberator years ago.
#5
Registered
iTrader: (3)
Just be carefull with the bleach..learned that the hard way. Sewer line broke a few years ago at the street and my basement backed up ugly... went to menards and got a bunch of bleach and started mopping and scrubbing like mad... ended up chemical burning myself in various spots... never contemplated how viscous strong bleach solutions can be, but the stuff works though. Also wont hurt to treat the vinyl a couple times as the bleach can really dry it out.
#6
Registered
I've had great results with Zep Mold and Mildew Stain Remover from Home Depot. Just use gloves and buy the better spray bottle cause it will eat the insides of the cheap ones.
#7
Registered
One of our detailers used a combo of bleach and Baking Soda as a paste to remove mold stains - slow but worked well.. Magic erasers are extremely fast and thorough... but are removing the top layer of the vinyl as the active agent is TSP( cleaned vs uncleaned with magic erasers - cleaned will be slightly matte.... but clean)
#9
Registered
iTrader: (7)
These are helpful threads for everyone and there's no argueing or name calling to boot. Lol...
#10
*
Platinum Member
I've very recently learned , from a guy who should know , that supposedly hydrogen peroxide does kill the stuff. I'm now in the early stages of trying it out around the house and look forward to good results . There's absolutely no shortage of things to try it on around here !