oil cooler install
 

was looking at part number 625-8054 from cpperformance and was curious how hard is it to install one of these? thanks guys , dont have tons of room under the hatch

If you don't have one, I assume you have a small block currently with no cooler?

no want to upgrade , running 488 stroker with a supercharger on it ! would like to go to a remote oil cooler with built in thermostat.

i dont think the cpperformance one offers a built in thermostat , if anyone knows of any other ones that have one built in , that would be great

Do some research. There available.

Check out Keith eikert.

Do you have a small cooler on it now? A tube type one? You need to choose one that you are going to be able to mount and plumb best with your engine setup. If you already have a tube type then replacing with a larger tube type would work best. They have dual cooler ones also for your oil and power steering. As for the thermostat, is your oil filter the stock block mounted or a remote mount? Earls makes a nice billet sandwich adapter with thermostat for use with a block mounted filter. They also make a in line thermostat you plumb in for use with a remote oil filter.
http://www.jegs.com/i/Earls/361/504/10002/-1
http://www.jegs.com/i/Earls/361/501/10002/-1