Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   Getting the #@$%& K--plane indicator cable out (https://www.offshoreonly.com/forums/do-yourself-boating-budget/351645-getting-%40%24%25-k-plane-indicator-cable-out.html)

JohnRork 01-08-2018 04:22 PM
Originally Posted by Knot 4 Me (Post 4603744)
A good marine silicone is all that should be needed. 3M 4200 is even overkill for this application IMO.
Thank you very much. I sure don't want to repeat that anytime soon (hoping the starboard side lasts a while)

class6 01-08-2018 06:20 PM
If the cables are installed correctly they will last for years. 5200 keeps them in place and water from soaking into the transom. I would not reply on those plastic cable locks to keep it in place. And the crush rubbers are a good spot for the 5200. And don't forget to 5200 the cable from the inside also.


All times are GMT -5. The time now is 12:31 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.