Offshoreonly.com - Crane Cam

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Crane Cam (https://www.offshoreonly.com/forums/do-yourself-boating-budget/353251-crane-cam.html)

ahlenius

04-07-2018 06:34 PM

Crane Cam

Does anyone know what grind this Crane cam is #'s engraved around the edge are "139641" Also engraved is "13-14-97 CR"
These are out my 540 engines any info would be appreciated Thanks

BillK

04-07-2018 07:14 PM

If it isnt in their latest catalog which is available on the web site, then give them a call. They are very helpful at looking at older part numbers and can e-mail you a cam card.

sutphen 30

04-07-2018 08:38 PM

I believe this is what your looking for

234/242 at .050, .610/.632 ls112

ahlenius

04-08-2018 09:04 PM

Ok so is This an acceptable for a marine 540 with a SC3300 Whipple and Carrillo rods and Kryptonite crank I'm not a Gear head so please I welcome any advise or comments,Thanks

Griff

04-09-2018 12:59 AM

Acceptable.......Yes. Its very close in specs to the Crane 168741. https://www.summitracing.com/parts/crn-168741.

Optimal,..... maybe. It looks like its for your Aronow Cat which is very heavy. It may not make the most HP, but the torque should be good.

ahlenius

04-09-2018 09:47 AM

Yup came out of the cat! I was pondering having Marine kinetics grind two new ones, That old beast will never ever be a speed demon, so maybe i will use them. Im looking more for reliability and longevity rather than hp.

snapmorgan

04-09-2018 10:01 AM

You may want to research Marine Kinetics before you do that, or have all of the threads been deleted?

All times are GMT -5. The time now is 08:41 PM.