Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   Small block Chevy headers (https://www.offshoreonly.com/forums/do-yourself-boating-budget/353536-small-block-chevy-headers.html)

Sonic30ss 05-10-2018 09:17 PM
GLM with 4" Imco risers is a good low cost option

David Stotz 05-17-2018 02:47 PM
I have a set of SBC Glenwood aluminum manifolds with Imco 4" risers that have the longer tails if your still interested. They also come with studs to mount the manifolds to the block so you don't have to use the bolts, but I also have the bolts. Also comes with the plate to mount the shifter/throttle bracket. Let me know.


All times are GMT -5. The time now is 01:57 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.