Rebuilding stringers, floor, and transom
 

I’m considering a project boat. It will at least need new stringers and floor, possibly transom. Who has done this before and has some words of wisdom. What is a realistic cost and level of effort for a 23’ boat? I’m thinking Coosa for the transom, posssivle floor, and seacast or Nida for stringers. Any other materials to look at? Thanks for your suggestions.

Lots of threads in the Fiberglass and Paint Section. That's a whole lotta work for a 23' boat.

You do not want to do a coosa transom.

Plywood.

Find a 23' boat that doesn't need so much work. It will be cheaper than your project in the long run. I did my 28' hull for two reasons. It is a Cigarette Racing Team hull, and I am crazy!

3 layers of 1/2" marine ply laminated together. Coosa is great stuff when used in conjunction with its properties. As a stringer or bulkhead its great (with the exception of the motor mount area on the stringers)

For a transom, it does not like compression and shear.

wow,,,i did not do the glass work , but gutted my engine compartment of everything
u will have to reset your motor mounts
need alignment tool for that
lots of work...

i post a thread

38 scarab rebuild