Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   under hatch pictures turbo setups (https://www.offshoreonly.com/forums/do-yourself-boating-budget/366166-under-hatch-pictures-turbo-setups.html)

brett fiddes 06-08-2020 05:27 PM
check300
are those borg warner 75mm turbos on T4 or T6 frames?
the boost gauge setup is neat with the key
which brand of electronic setup is this?
Brett

check300 06-08-2020 08:08 PM
Originally Posted by brett fiddes (Post 4742643)
check300
are those borg warner 75mm turbos on T4 or T6 frames?
the boost gauge setup is neat with the key
which brand of electronic setup is this?
Brett
We used a t5 and they were Bullseye prepared Borg Warners. The ecu was BigStuff 3. Coil on plug.

Team Archer 06-09-2020 01:03 PM
The Gentry Setups run the waste gate in the turbo housing and dump it into the tail pipe.
https://cimg5.ibsrv.net/gimg/www.off...578d03b167.jpg
carb version
https://cimg9.ibsrv.net/gimg/www.off...5330cf354e.jpg
you can see the waste gate control on the side of the turbo housing silver cylinder.
https://cimg4.ibsrv.net/gimg/www.off...15bcd62fdc.jpg
EFI turbo system

brett fiddes 06-10-2020 04:31 AM
nice setup
I need another 20 feet added to my turd to add some more HP
nice setup
but think I need external waste gates


All times are GMT -5. The time now is 04:03 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.