AllDodge

iTrader: (1)

Listening to a motor will not tell if there would be reversion. SB is saying the cam that was installed can cause reversion

The original factory cam could be reinstalled without issue if the cam is in good shape

Brandon Shoot

It is not the factory motor that was in there I do not believe.. Let me try and touch base with the old owner

AllDodge

iTrader: (1)

If it was a motor from a truck your still good

Brandon Shoot

What else would I need besides that cam brother?

Brandon Shoot

I found out that it was the original motor. I also found this about the engine I bought as well, if different than what was specified previously:

Brandon Shoot

New engine

AllDodge

iTrader: (1)

No offense but I don't understand where the question is coming from. SB said you should use a different cam, ones he pointed out. I said could use the one from the motor the block came with if it was from a truck. I stated the gaskets needed

SB

iTrader: (1)

Do google search of following:

xm256H-12 offshoreonly.com

Brandon Shoot

SB, what you told me to copy and paste is the same cam that you posted on #26?

SB

iTrader: (1)

Exactly.

I did that so you can read various threads on the subject. example : Duration and overlap is nit just about sucking water back or not, it also determines rpm power range :thumbs