540 Camshaft needed
 

Hello All,
I'm looking to purchase a hydraulic roller cam for a Gen V1 540 engine but can seem to locate one. The engine is natural aspirated 9.5 with 305 AFR heads. Can anyone suggest or have a source for one.
Thanks
Jeff

how much power do you want to make?

I have cams in stock.
Ron 504-161-6005

what do you have?

I've got these in a NA 588 build: Bullet 244/250 112 .664/.663 They make power and sound great.

I highly suggest a 3/4 race cam for your application.
A full race cam might be a little much.

we run a very strong 540 bullet cams made the cam it is awesome and they are old school and fun to work with

what gen blocks are your 540's,i have brand new bullet cams for gen 6,240,248 ls112 .620's lift double swap.

Also can contact Hardin Marine, they have a couple of real nice HP camshafts, be careful not to go wild and create reversion.
Here is what my buddy runs in his built 540 and I run in my 509. Comp Cams 01-775-8 grind # CBVI XR271HR-12
.591/.601 224/232 @ .050 112 LSA (off the shelf cam).

almost the crane 731,nice