Donzi Pics Let's See em'
01-11-2011 | 10:45 AM
#141
Registered
Joined: Aug 2008
Posts: 520
Likes: 1
From: St. Petersburg, Fla.
Hey Mark,
Good to hear from you. She is my pride and joy. Yes, that was the weekend I picked her up from Donzi. It was their in house boat. It is a 2003 but I am the first registered owner. Other than blowing both motors in June 2008, everything was great. The former people at Donzi fed me a line a B.S. about fresh motors. Everything else was great and the boat has all the 2007 updates.
She runs like a raped ape since Ron Potter built the 575's up to 700's!
Good to hear from you. She is my pride and joy. Yes, that was the weekend I picked her up from Donzi. It was their in house boat. It is a 2003 but I am the first registered owner. Other than blowing both motors in June 2008, everything was great. The former people at Donzi fed me a line a B.S. about fresh motors. Everything else was great and the boat has all the 2007 updates.
She runs like a raped ape since Ron Potter built the 575's up to 700's!
01-12-2011 | 08:38 PM
#143
Gold Member
Joined: Jun 2005
Posts: 441
Likes: 1
From: Canton,Michigan
Hey Tom,
Those are awesome numbers. I have the stock 600SCI's in my boat and touch 95. I talked to Dustiin Whipple about his stage one upgrades that would give me 700hp a side and probably put me over 100mph. It's very tempting but I'm concerned about my drives. I have XR Shorties and get about 100 hrs out of them now. What are you running and what has your experience been.
Thanks, Mark
Those are awesome numbers. I have the stock 600SCI's in my boat and touch 95. I talked to Dustiin Whipple about his stage one upgrades that would give me 700hp a side and probably put me over 100mph. It's very tempting but I'm concerned about my drives. I have XR Shorties and get about 100 hrs out of them now. What are you running and what has your experience been.
Thanks, Mark
Last edited by MarkDonzi; 01-12-2011 at 08:40 PM.
01-12-2011 | 09:42 PM
#144
Platinum Member
Joined: Nov 2002
Posts: 4,288
Likes: 87
From: New Jersey
Xr's......
Blew a couple already, I switched to the Synthetic race lube and made it through all last year. I am upgrading to the Imco SCX's for this year. I hear they hold up well to about 900hp. Fingers crossed
If you go up to 700hp its not a matter of if they will hold, it is just a question of when will they blow.
Below is what happened in Miami last Feb..... running 60mph. Interesting thing Craig Barrie told me was that it was most likely due to me following in the bubble trails too long and the drive not getting enough water flow to cool it. (I was following a big group through Biscayne for quite a few miles.) I would have never thought about it but he said the water in Florida holds air a lot longer than up north where it is denser. After he told me this, I did notice that the bubble trails are 10 times longer in Fla. photos vs. NJ pics.
Blew a couple already, I switched to the Synthetic race lube and made it through all last year. I am upgrading to the Imco SCX's for this year. I hear they hold up well to about 900hp. Fingers crossed
If you go up to 700hp its not a matter of if they will hold, it is just a question of when will they blow.
Below is what happened in Miami last Feb..... running 60mph. Interesting thing Craig Barrie told me was that it was most likely due to me following in the bubble trails too long and the drive not getting enough water flow to cool it. (I was following a big group through Biscayne for quite a few miles.) I would have never thought about it but he said the water in Florida holds air a lot longer than up north where it is denser. After he told me this, I did notice that the bubble trails are 10 times longer in Fla. photos vs. NJ pics.
01-14-2011 | 04:55 AM
#147
Gold Member
Joined: Jun 2005
Posts: 441
Likes: 1
From: Canton,Michigan
Tufaro,
My old boat was a 525 ZR. I had XR's and ran hering 5 blade props. I never blew a drive but completely wore them out at 200 hrs. clutches started to slip and when they tore down everything was worn but never broke underway.I did not baby the boat. Maybe just lucky?) 600SCI have way more torque and I think thats the main difference.
Mark
My old boat was a 525 ZR. I had XR's and ran hering 5 blade props. I never blew a drive but completely wore them out at 200 hrs. clutches started to slip and when they tore down everything was worn but never broke underway.I did not baby the boat. Maybe just lucky?) 600SCI have way more torque and I think thats the main difference.
Mark
01-14-2011 | 08:19 AM
#148
Registered
Joined: Aug 2008
Posts: 520
Likes: 1
From: St. Petersburg, Fla.
01-14-2011 | 08:40 AM
#149
Platinum Member
Joined: May 2003
Posts: 667
Likes: 0
From: Metairie, La.
Tufaro,
My old boat was a 525 ZR. I had XR's and ran hering 5 blade props. I never blew a drive but completely wore them out at 200 hrs. clutches started to slip and when they tore down everything was worn but never broke underway.I did not baby the boat. Maybe just lucky?) 600SCI have way more torque and I think thats the main difference.
Mark
My old boat was a 525 ZR. I had XR's and ran hering 5 blade props. I never blew a drive but completely wore them out at 200 hrs. clutches started to slip and when they tore down everything was worn but never broke underway.I did not baby the boat. Maybe just lucky?) 600SCI have way more torque and I think thats the main difference.
Mark
That's about what I expected.
