donzi 27zx
#1
Thread Starter
Registered
Joined: May 2009
Posts: 16
Likes: 0
i just got my boat back on the water ill take pics later but just wanted to give you guys an update that it ran awesome. the exhaust got finished saturday night its stainless marine and when stared it up i thought my engine had a really bad know but i found out a couple minutes later that is was the flaps on my exhaust haha any ways a 20' action craft pulled up to me when i cruising at 50 and he wanted to race so i stayed with him to about 60 and then it was gettin choppy so i trimmed up my drive and ran 75 and waved goodbye arent center center consoles fun to mess with. anyways any tampa bay boaters that wanna meet up let me know
#2
i just got my boat back on the water ill take pics later but just wanted to give you guys an update that it ran awesome. the exhaust got finished saturday night its stainless marine and when stared it up i thought my engine had a really bad know but i found out a couple minutes later that is was the flaps on my exhaust haha any ways a 20' action craft pulled up to me when i cruising at 50 and he wanted to race so i stayed with him to about 60 and then it was gettin choppy so i trimmed up my drive and ran 75 and waved goodbye arent center center consoles fun to mess with. anyways any tampa bay boaters that wanna meet up let me know

What kind of power are you running and what speeds are you seeing?
#3
Thread Starter
Registered
Joined: May 2009
Posts: 16
Likes: 0
i have 540ci merlin fully built i believe 620hp and a bravo one with imco ext. i think 12 or 16in and the motor only has 12 hrs so im still breaking it in but at 4600rpms im running 70ish what kind of boat do you have
#4
I wanted to move to a step hull so I bought a 26ZX. It has a Young Performance 850 SCI in it. The best I have seen in it is 103 mph. It can get kind of crazy over 90. I have a friend that has one of the first 27ZX twin steps and his runs in the low 90's. It is dialed in.
How does the ext box work out. I pondered that with my 27.
#5
Thread Starter
Registered
Joined: May 2009
Posts: 16
Likes: 0
it makes the boat excellent its a 12in stand off box with hyrdraulic steering and nice set of k planes i just got the boat a week ago its an incredible upgrade from my 19ft mako and i got this boat for a steal i got the boat motor trailer new interior and a clean title for 17,200
#6
Registered
Joined: Jun 2004
Posts: 444
Likes: 1
it makes the boat excellent its a 12in stand off box with hyrdraulic steering and nice set of k planes i just got the boat a week ago its an incredible upgrade from my 19ft mako and i got this boat for a steal i got the boat motor trailer new interior and a clean title for 17,200
I would like to know more about the boats set up...Is the box 3 inch rise or is it neutral? Is this a step bottom boat ? what gear and prop are you running.
I have a 97 twin step with some HP and run into the lower 90's
Need some photos...nice rig
Bryan
#7
Thread Starter
Registered
Joined: May 2009
Posts: 16
Likes: 0
http://i257.photobucket.com/albums/h.../IMG000132.jpg
http://i257.photobucket.com/albums/h...k/IMG00025.jpg
http://i257.photobucket.com/albums/h...k/IMG00025.jpg
Last edited by ceDONZI27zx; 07-15-2009 at 02:00 PM. Reason: cause i do
#10
Registered
Joined: Jul 2009
Posts: 52
Likes: 0
Sweet boat man... I too just got into a 27zx but it has a 502. I wish to upgrade as 57mph top speed is just not satisfying enough to me. I blew up an outdrive this weekend by (luckily) hitting a floating log...insurance WILL cover that...but towing your Donzi with your buddies 18' larson deck boat sux. I've been eyeballing an XR drive so I can do a rebuild on the engine right. If everything works out maybe the drive part will be **free. Anyway what drive do you have on yours?


