Donzi parts
05-02-2013 | 04:53 AM
#1
Thread Starter
Registered
Joined: Aug 2005
Posts: 437
Likes: 26
From: New England
Donzi parts
With Donzi Marine in it's current sate, has anyone had issues or problems getting factory parts for your boats? How about dealer support? What it boils down to is I'm looking at 2 different 35ZR's and I'm concerned about parts down the road. Also what is the general consensus on the value of these? One is an '05 with 525s's, and the other is an '06 with 525's also. both clean and low hours.
Last edited by neva satisfied; 05-02-2013 at 06:27 AM.
05-02-2013 | 08:25 AM
#2
Platinum Member
Joined: Nov 2002
Posts: 4,288
Likes: 87
From: New Jersey
For Parts - donzidirect.com
If they don't have it, they know where to source it.
Dealer support for most go-fast boats is minimal at best and Donzi has a real limited amount of dealers. There are however a ton of former Donzi dealers who are still in business and have mechanics very familiar with the boats.
As for prices, $120-130K range.
$150K buys you a 38zr with staggered 525s.
If they don't have it, they know where to source it.
Dealer support for most go-fast boats is minimal at best and Donzi has a real limited amount of dealers. There are however a ton of former Donzi dealers who are still in business and have mechanics very familiar with the boats.
As for prices, $120-130K range.
$150K buys you a 38zr with staggered 525s.
