New 32 doug wright 400r build
#6
Registered User

Joined: Nov 2014
Posts: 584
Likes: 0
From: Toms River,NJ / Siesta Key, Sarasota, Fla.
Hey Ktron. Have they had the boat on the trailer yet. I had a Myco built and shipped to Skater. Its a beautiful trailer but the bunks were a half inch off on each side. I assume it sits on the splash rail like mine. Skater was kind enough to redo the bunks of me. Just curious and you should check it well in advance of doing a transport incase it was like mine. Could avoid some small headaches.
#8
Registered User

Joined: Nov 2014
Posts: 584
Likes: 0
From: Toms River,NJ / Siesta Key, Sarasota, Fla.
That would be great. I m just saying that They had all the exact dimensions of my rig and it was off. The welds were beautiful but the bunks had to be removed and redone. Im glad it usually works out perfect but you can never be too cautious. Just throwing it out there.
#10
Registered
Joined: Aug 2006
Posts: 350
Likes: 0
From: Casa De Kappy
That would be great. I m just saying that They had all the exact dimensions of my rig and it was off. The welds were beautiful but the bunks had to be removed and redone. Im glad it usually works out perfect but you can never be too cautious. Just throwing it out there.
What Nastybug is telling you is great advice. I had the same issues when I received my trailer. The back two bunks did not even touch the hull.
I had to do a lot of customizing to my Myco to get it right.
You are going to love your DW nothing like it on the water. Those 400R motors are the ticket no oil and quiet. Plus they pull hard and very little maintenance.




