^^^^^^ let us know what you know

.


SportBoatNews by noli
Final milling of the 35RT tunnel will be completed and the milling of the sponson will begin today

.



DougWright continues with the milling of the 35RT. This time he's doing one of the sponsons. Again, he's milling the mold directly bypassing the plug creation.
I know the video is not clear but you can begin to see the steps of the hull being cut into the foam.
There are markers on the three-piece mold to be sure that the alignment is precise.




http://www.youtube.com/watch?v=dIgE-cCWAEE

.




Milling of the sponson on the 35RT


http://www.youtube.com/watch?v=cm7V-pE9O0g

.




Milling of the sponson on the 35RT


http://www.youtube.com/watch?v=GKzVOJXHrws

.




https://speedonthewater.com/in-the-n...-pleasure-cats






.

.


Here's some updates on the 35RT

Milling of the sponson

Pics courtesy of Scott Porta

.

The mold is complete and from what I hear, the first hull is well under way


pics by Scott Porta

The boat is way beyond this stage and there are multiple already sold. I don't think that there will be many pictures before the boat is seen by the public at the LOTO shootout. It is an absolute piece of art and technology combination.

Joe

.


can we get some teaser pics at least





.