![]() |
1 Attachment(s)
I had an old pump sprayer laying around. The wand was broke so I spliced into the line. I bought a small inline valve and attached the hose thats on the hand pump in the picture. Not sure if it works though..havent used it yet :rolleyes:
|
Thanks for the photos.
|
99...can you explain how to change the drive oil with these things? Also, what parts did you buy?
Thanks |
Originally Posted by tblrklakemo
(Post 2129666)
99...can you explain how to change the drive oil with these things? Also, what parts did you buy?
Thanks |
2 Attachment(s)
others pics..
|
|
Yeah, I read that but still a little foggy. You take the drive drain screw out of the drive(behind the prop), drain the oil, and then insert the drilled out tire valve(that is the same size as the drive drain screw) and pump and fill until comes into the reservoir....then remove quickly and put screw back in?
Thanks and sorry....i need to see these things up close some times. I have all the stuff, but just dont want to butcher it yet. |
|
awesome, thanks so you just fitted the quicksilver end to your fertalizer pump?
|
The slickest filling tool ive seen was at a marina where they made an old keg into a drive filler......they fill the keg up with oil....the filler tube was attached to a pickup tube much like a fuel pickup in our gas tanks...and they had a tire valve right next to it.....so the guy just screws in the attachment to the drive...hooks up an air line and opens the air valve and presureises the keg.....filled the drive up in what seemed like 30 seconds!!
I made my own version out of a plastic container that hold 2 quarts of oil....only thing is if i run too much psi into it it starts to swell up...but it works nice :D |
| All times are GMT -5. The time now is 06:13 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.