Offshoreonly.com - Drive Showers

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Drive Showers (https://www.offshoreonly.com/forums/drives-lower-units/166491-drive-showers.html)

Rebel_Heart

08-19-2007 01:38 AM

I'm still running the Smireks on my Bravos. Are these showers substantially better?

Griswald

08-19-2007 07:41 AM

Quote:

Originally Posted by VegasHallett (Post 2239726)

This will also work for your billet cap without any problems. However you are correct about adding a 90 degree fitting.:ernaehrung004:

I'll try and snap a pic of mine and post it up later today.

Brandon

08-20-2007 07:13 PM

Quote:

Originally Posted by VegasHallett (Post 2239356)

I can get you a good price on the innovative marine Hydro Cool II drive shower (www.innovativemarine.net.) You can mount the pick up port on the drive or route the supply line to your water pump. I have mine routed to my water exhaust coming from my intercooler on my supercharger. Now the drive shower sprays water all the time even with the engine is at idle in neutral. I don't have to worry about any cavitation from the pick up port and drilling holes on my drive. I can trim my drive anywhere and I'm getting the same water flow. It's a great design and concept.

I work with owner/operator of innovativemarine, real good guy. Actually talked to him today at work about a set for my boat.

onesickpantera

08-22-2007 08:35 AM

Quote:

Originally Posted by DMAX (Post 2239510)

O.K. now I'am getting some where. Do you have any pics from inside the boat out. Thanks

No, I don't. I simply put a T fitting in the output hose.

Griff

08-22-2007 12:14 PM

1 Attachment(s)

Another possibility for you.

This is an Imco shower.I had to mill off about a 1/8 of an inch around the bottom of the shower to give enough clearance for the steering bracket. I had a hull pick up for the engine cooling water so we tapped the water jacket on the drive.

Smitty

08-22-2007 02:56 PM

I've got one Innovative Marine drive shower to sell. It was used for one season of about 50 hours time.

DMAX	08-22-2007 05:29 PM

Thanks for the info, you've very helpful. I'll repost after its done. Thanks again. P.S> anybody else going to Rock The Bay next month.

launchpad475

05-08-2013 01:14 PM

Thought about doing this to my set up, looks like innovate marine is not around anymore?

My drive shower is #8 braided, biggest thru hull I can find at CP is a number 6.

I'd like to feed my shower off my intercooler pick up.

CaribouLou

05-13-2013 03:55 PM

Quote:

Originally Posted by launchpad475 (Post 3921576)

x2 on wanting to feed off the intercooler pick up...when you get back in town I'd be interested in figuring this out.

All times are GMT -5. The time now is 10:19 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page