Offshoreonly.com - Nose Cones

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Nose Cones (https://www.offshoreonly.com/forums/drives-lower-units/168939-nose-cones.html)

TylerBurich

09-17-2007 03:57 PM

Nose Cones

My nose cones on my trs drives apear to be cracking where they meet the drive. It's starting to look like chit, is there anything i can do. How were they installed originally? I would like to smooth out the transition and repaint the lowers.

Thunderstruck

09-17-2007 04:04 PM

Sand them down, re-epoxy and paint. Here is a link for the epoxy products I used to install nose cones.

http://www.westsystem.com/ewmag/15/noseforspeed.html

LAKESIDE RESTORATIONS

09-18-2007 07:29 AM

I agree, its probably the old epoxy breaking down. It may not have been prepped & installer properly originally.. J

J-Bonz

09-18-2007 08:03 AM

You can use "All Metal" that is suggested by Tom at Hydromotive.
Jr.

All times are GMT -5. The time now is 01:03 AM.