Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   Who builds the strongest XR (https://www.offshoreonly.com/forums/drives-lower-units/170859-who-builds-strongest-xr.html)

GPM 10-10-2007 07:13 PM

Who builds the strongest XR
 
Need opinions who builds the strongest XR drive.

Vinny P 10-10-2007 09:21 PM

Mr Gadgets does a great drive. Look him up here on OSO

KAAMA 10-11-2007 01:14 PM


Originally Posted by checkmate454mag (Post 2302288)
Mr Gadgets does a great drive. Look him up here on OSO

The thing I like about Mr.Gadget's is that he checks everything and completely blueprints the drive. He's got one wild set of mircrometers! I was his first customer about 5 years ago....about 250 hours and still going strong. He's done a lot of drives for guys on OSO from all over.

Ask him how he got into rebuilding Bravo Ones...quite a story.

Smitty 10-11-2007 05:37 PM

Mr. Gadgets without a doubt. I am putting big power thru the ones he built for me. I had him do a tear down after one season and everything looked perfect. I am smart with the sticks as well. I highly reccomend him.

GPM 10-11-2007 07:54 PM

Thanks for the advice, I will make the call. Just curious, has anyone tried Billet Marine, they advertise an XR that will handle 1200 hp. www.billetmarine.com

DMOORE 10-11-2007 08:26 PM


Originally Posted by GPM (Post 2303321)
Thanks for the advice, I will make the call. Just curious, has anyone tried Billet Marine, they advertise an XR that will handle 1200 hp. www.billetmarine.com

1200HP and a Bravo is not a good combo. That's #6 territory.


Darrell.

RunninHotRacing163.1 10-11-2007 08:31 PM

BOB TEAGUE builds a BADD AZZ drive with the platinum shaft we put 1100 hp to it and ran 138 with no probs, just changed fluid ever 10 hours

GPM 10-11-2007 09:12 PM


Originally Posted by RUNNINHOTRACING158 (Post 2303373)
BOB TEAGUE builds a BADD AZZ drive with the platinum shaft we put 1100 hp to it and ran 138 with no probs, just changed fluid ever 10 hours

Already broke 2 of those, thanks anyway.

Rebel_Heart 10-11-2007 11:01 PM

Mr. Gadgets lined up my -2" Imcos. We did the cold processing treatment, good so far. Didn't touch the uppers, yet!

articfriends 10-12-2007 12:57 AM


Originally Posted by GPM (Post 2303321)
Thanks for the advice, I will make the call. Just curious, has anyone tried Billet Marine, they advertise an XR that will handle 1200 hp. www.billetmarine.com

Gary,their ad is unclear,they imply they offer custom billet drive ratios but then they go on to say they use mercruiser gears. Some of their tech sounds like the old school stuff the bravo shop and max worx used to do before the xr gear sets came out (tig welding the floor of stock,weak upper gears then heat treating or cryotreating them). I would be cautious before spending any coin with them because I don't think they are offering anything that you don't already have or have tried unless they actually are marketing a billet lower gear set,Smitty


All times are GMT -5. The time now is 01:33 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.